Inline Hockey Wheels, Bearings, Axles & Spacers

At Hockey Giant, we get a fair amount of calls from customers who have questions as they're looking for wheels, bearings, axles, and spacers. There seems to be a bit of confusion when it comes to matching up the various parts. We'll attempt to shed some light on the subject by identifying each of the individual parts and the variations that you'll come across as you look at different skates and chassis models.

The core (aka "hub") of the wheel is the center, plastic part into which the bearings are inserted. There are two different core sizes available: 688 micro-bearing core wheels (pictured on left below) and 608 standard bearing wheels (pictured on right below). As you can see, the hole in the middle of each wheel is a different size, therefore they require bearings of different sizes. There are essentialy 4 different types of spacers: Standard 608, Micro 688, Floating Standard 608, and Floating Micro 688. They are labeled in the image below. There are 3 different axles pictured below as well: 6mm Axle and Screw, 8mm Axle and Screw, 8mm Axle Bolt.

The tree diagram below starts with the wheel type (608 Standard or 688 Micro) and then identifies which spacers and bearings will be needed based on your axle type. Most axles, whether 6mm or 8mm, have a female end into which the male screw is inserted, although some axles (usually just 8mm) have threads on the end of the bolt which screw directly into the chassis threads. In any case, the mm size of the axle and the wheel core type determines which type of spacers will be needed in order to properly mount the wheels to your chassis.

Most inline hockey skates are assembled with standard bearing wheels on the chassis, but there are of course some skates that are assembled with micro-bearing wheels. Since micro-bearing core wheels are currently being phased out you might consider making the switch to standard bearing wheels, such as the Labeda Addiction XXX Inline Wheels or Rink Rat Hornet Split Inline Wheels just for the sake of future availability and compatibility.

Get your Inline Hockey Wheels, Bearings, Spacers, and Axles today at HockeyGiant.com

Benefits of Wearing Hockey Performance Apparel

Performance apparel is becoming much more popular among players of all ages and skill levels. Performance apparel is offered in two fits: compression and loose. Fit is a matter of preference, but in order to reap the true performance benefits of under apparel, the compression fit is the way to go. When you wear compression shorts/pants, shirts and socks, bloodflow is increased and your muscles recover more quickly. Most performance apparel is also hydrophobic, which means it will keep you cool and wick away sweat.

There's a difference between constriction and a healthy amount of muscle compression. If your compression apparel is too tight, your bloodflow will decrease and your muscles will grow weak more quickly because they will not receive enough oxygen to recover as you play/practice. Compression apparel should fit tightly and comfortably. So make sure that if you decide to wear compression shorts, pants, shirts, or socks, you get the proper size. Otherwise, you might as well just not wear it at all.

Loose-fitting performance apparel is moisture-wicking, breathable and comfortable, but it does not provide the benefits of muscle compression. It's a great choice for players who simply prefer this type of fit over the compression fit. Players have been wearing regular t-shirts and boxer briefs under their gear for years, so it's not like you'll be at a severe disadvantage if you choose to go this route, but you might want to try the compression fit before dismissing it because there are certainly a few benefits to wearing it.

Every manufacturer has been increasing the number of performance apparel options that they provide each year. Whether you prefer to wear Bauer, Reebok, Easton, Shock Doctor, or Under Armour, is totally up to you. But it's nice to know that you have options. Each of these manufacturers have performance apparel shirts, shorts, pants, and socks, as well as shorts and pants with integrated jocks and Velcro sock tabs. The all-in-one jock shorts and pants are very convenient and give you one or two fewer things to forget each time you pack your bag to head to the rink.

Like any other piece of equipment, hockey performance apparel gets pretty smelly if you don't wash it. Make sure you take a look at the tags to find the appropriate cleaning method. Most hockey performance apparel can be tossed into the washing machine, but make sure you take out your cup first, and like I said before, check the tags.

Shop for Bauer Hockey Performance Apparel Today at HockeyGiant.com

Hockey Shaft & Blade Combos

These days, most hockey players are opting to use OPS sticks rather than two-piece blade and shaft combos. Some say it's because of the weight difference; others say it's because they feel like the low-kick flex point is more consistent. I grew up using wood sticks and eventually made the change to two piece shaft and blade combos. That was back in the days of the original Easton Ultra Lite shaft – a breakthrough in its own right for that time.

For years, I've been using shafts and blades and I've always been pleased. For some reason I decided to switch back to wood sticks for a while, which was fine, but I had trouble finding one that held up as well as the old Bauer Supreme 3030 sticks I used to play with. At that point I decided to try out a few OPS's. I wasn't disappointed with the performance of the sticks, but when I started breaking blades, I thought, "If this was a shaft/blade combo, I wouldn't be out $200 right now."

I don't have anything against one piece sticks, but I'd like to offer a few reasons to consider using a shaft/blade combo instead. Everyone has their own set of preferences when it comes to sticks, so what works for you may not be the best fit for the next guy.

Upsides to Using a Shaft/Blade Combo

1. The most obvious upside to using a shaft/blade combo is that when you break a blade, that's all you have to replace. It's much cheaper to replace a $30-$40 blade than to replace a $200 stick.


2. Cross-brand options – When you buy a Bauer OPS, you get Bauer blade patterns. When you buy an Easton OPS, you get Easton blade patterns. When you buy a shaft and blade separately, you have the option of mixing and matching the blade and shaft that work best for you. Maybe you like the TotalOne Shaft from Bauer, but you want to use a Synergy ST Blade from Easton... Not a problem.


3. Durability – This may have just been my own experience, but I've noticed a serious difference in durability between Shaft/Blade combos and OPS's. Not all OPS sticks, but many of the ones I've used have broken in a relatively short amount of time – much less time than the Shafts and Blades I've used. I don't have any science to back this up, but it might be the difference in torque distribution that causes a one piece stick to snap more easily than a shaft. Perhaps the material overlap of a shaft/blade combo acts as a form of reinforcement?

In any case, shafts and blades may not be the current trend, but there's certainly an argument to be made for them. There are plenty of reasons to give it a shot. Just keep in mind that shafts and blades come in "tapered" (.520") and "non-tapered" (standard .620"). You must only match tapered blades with tapered shafts and non-tapered blades with non-tapered shafts.

Get your Hockey Shafts & Blades at HockeyGiant.com

Easton Synergy EQ50 Hockey Stick Review

I recently had the opportunity to try out the Easton Synergy EQ50 Stick. I went with the Zetterberg 85 Flex Left. Of course, when I pulled it out of the packaging the first thing I noticed was the slick design of the graphics. I'm partial to black and red, so right off the bat this was one of the better looking sticks I've seen in quite a while. Simple, clean and classic – no need for fancy schmancy fluff.

When I leaned on it to test the flex I was actually surprised by the stiffness of the lower half of the shaft. The other two sticks in my rotation are the Bauer Vapor X:60 and Reebok 11K, so with those two sticks as a reference point I wasn't sure how the EQ50 was going to feel once I actually got out on the rink with it. About a year ago I had an Easton Synergy SE16, but the EQ50 had a different feel; mostly, as I noted, the stiffness of the lower part of the shaft. Anyhow, at this point I had only given it a good flex in my garage, so this was just my first impression.

Warmups started for my game last night and I spent the first few minutes just screwing around with a puck to get a feel for the stick. In all honesty, I've never picked up a stick that felt as natural as the EQ50 right from the get-go. The puck-feel is incredible. I made a few passes back and forth with one of my team mates and the puck stopped dead on my blade every time. So far so good.

After passing the puck around a bit, I took a wrister from the top of the circle and the release couldn't have been smoother. As I said before, when I first received the stick I gave it a good bend and was surprised by the stiffness of the lower half, and that made me wonder how well the wristers would release. But, once again, I was impressed with the quick, accurate release that it gave me. After that I took a couple snappers and a few slap shots with equally satisfying results.

Easton's Focus Weight Technology is implemented in the blade heel and butt end cap by the use of strategically placed weights – I could really feel the difference as I handled the puck, but it also keeps the stick from feeling blade-heavy when you shoot, which makes it incredibly simple to dial in with every type of shot. In some ways it resembled the feel of the SE16, but the FWT has been massively refined with the production of the EQ50.

Another concern I had before trying it out was the relative blade stiffness. With a stiff lower shaft, a floppy blade would cause a serious decline in performance quality. We all know what it's like to biff a shot because our blade can't handle the torque of a slap shot. The EQ50 did not disappoint; the blade was rigid and very responsive, which makes a huge difference when you're taking one-timers.

I honestly tried my hardest to find a flaw, any flaw, in the Easton Synergy EQ50, but I failed. Without a doubt, the EQ50 is the most well-balanced stick I've ever used – Power, Feel, Control.

Get your Easton Synergy EQ50 Hockey Stick at HockeyGiant.com

EZ Puck Training Tools Will Elevate Your Game

Are you looking for a breakthrough training tool to improve your puckhandling skills? EZPuck is the tool for you. EZPuck is easy to set up, easy to use, and incredibly effective on and off the ice. The EZPuck Hockey Puck Set comes with 6 discs (pucks) that serve as an incredible alternative to the standard orange cones you're used to using. All you do is place the EZPucks on the ice or shooting board in the desired formation and then you're ready to go. There are three pointed pegs on the underside of the EZPucks which keep them from sliding as you maneuver a puck or ball around them with your hockey stick. Practicing moves has never been so easy!

EZPuck also makes several complementary training tools that further enhance your training experience. They produce shooting boards in 4 different sizes (small, medium, large and x-large) with the option of pre-drilled holes which you place the EZPucks on in order to keep them from sliding. In addition, you can purchase the OneTimer Hockey Shooting Trainer which is a great tool for practicing passes and one-timer shots.

The manufacturers of EZPuck produced numerous instructional videos and drill diagrams that will help you get the most out of your training with EZPuck. Click on the following link to view some of the EZPuck drills. All of the EZPuck instructional videos are available on YouTube, including the two that we've embedded below. Elevate your game with EZPuck today!

Get your EZPuck training tools at HockeyGiant.com

Bauer - #1 Brand at 2011 NHL All-Star Game

At the 2011 NHL All-Star Game, more players used Bauer gear than any other brand. They reported some staggering numbers to us regarding the number of players who were using their skates, sticks, helmets, visors, gloves, and pants. Bauer topped the list in each of these equipment categories, and in some cases they did so with a sizable margin. In the image below, you can see the stats that Bauer reported following the 2011 NHL All-Star Game.

Get your Bauer hockey gear at HockeyGiant.com

Easton Hockey Sticks - Defenseman's Choice

After an exciting all-star weekend in North Carolina, Easton shared some interesting stats with us. Easton sticks seem to be the most popular choice among star defensemen in the NHL. If you were watching the skills competition, you saw the blistering 105.9 mph shot taken by Zdeno Chara in the hardest shot competition. Chara's stick of choice: Easton Synergy EQ50.

Here's a look at some of the numbers:

• Top 3 Defensemen picked at the All Star Fantasy Draft:
  
  
  
  • Duncan Keith - 4th pick overall: Stick of choice Easton
    
  • Zdeno Chara - 7th pick overall: Stick of choice Easton
    
  • Shea Weber - 8th pick overall: Stick of choice Easton
    
  
  
• 18 of 30 NHL teams' leading scoring defensemen choose Easton


• Nearly 50% of all points scored by the 30 NHL teams' top 2 scoring defensemen are scored with Easton sticks


• 42 of the NHL's top 100 scorers through the All-Star break use Easton sticks

Pretty impressive stats! The Synergy EQ50 is the newest top of the line model from Easton and it delivers some serious kick without sacrificing even the slightest bit of feel. Easton offers two additional top models with the Easton Stealth S19 Stick and Easton Synergy ST Stick.

Get your Easton Hockey Stick at HockeyGiant.com